25mm-50mm Glass wool Blanket,Glass wool with aluminium foil

25mm-50mm glass wool insulation 

What’s glass wool ?

Glass wool is an insulating material made from fibers of glass arranged using a binder into a texture similar to wool. The process traps many small pockets of air between the glass, and these small air pockets result in high thermal insulation properties. Glass wool is produced in rolls or in slabs, with different thermal and mechanical properties. It may also be produced as a material that can be sprayed or applied in place, on the surface to be insulated.

Principles of function

Gases possess bad thermal conduction properties compared to liquids and solids, and thus makes a good insulation material if they can be trapped. In order to further augment the effectiveness of a gas (such as air) it may be disrupted into small cells which cannot effectively transfer heat by natural convection . Convection involves a larger bulk flow of gas driven by buoyancy and temperature differences, and it does not work well in small cells where there is little density difference to drive it.

In order to accomplish formation of small gas cells in man-made thermal insulation, glass and polymer materials can be used to trap air in a foam-like structure. The same principle used in glass wool is used in other man-made insulators such as rock wool , styrofoam ,wetsuit neoprene foam fabrics, and fabrics such as Gore-Tex  and polar fleece. The air-trapping property is also the insulation principle used in nature in down feather and insulating hair such as natural wool .

General description

Wool plugs are often used in GC inlet liners to improve sample vaporization, and/or to keep non-volatile material from entering the column. They can also be used in packed GC columns, solvent desorption tubes, thermal desorption tubes, and purge traps to retain adsorbent beds.

Glass wool is made up of short glass fibres and is non-flammable in nature. It is widely considered as a thermal insulation material in ships, automobiles, air conditioning ducts and water supply pipes. Furthermore, it is also used as noise absorbing material in concert halls, studios and movie theatres. Above all that it is non carcinogenic to humans.

Manufacturing process

Natural sand and recycled glass are mixed and heated to 1,450 °C, to produce glass. The fiberglass is usually produced by a method similar to making cotton candy, by forcing it through a fine mesh by centripetal force, cooling on contact with the air. Cohesion and mechanical strength are obtained by the presence of a binder that “cements” the fibers together. A drop of bonder is placed at each fiber intersection. The fiber mat is then heated to around 200 °C to polymerize the resin and is calendered to give it strength and stability. Finally, the wool mat is cut and packed in rolls or panels, palletized, and stored for use.

Health problems

Fiberglass will irritate the eyes, skin, and the respiratory system. Potential symptoms include irritation of eyes, skin, nose, and throat, dyspnea (breathing difficulty), sore throat, hoarseness and cough. Scientific evidence demonstrates that fiberglass is safe to manufacture, install and use when recommended work practices are followed to reduce temporary mechanical irritation. Unfortunately these work practices are not always followed, and fiberglass is often left exposed in basements that later become occupied. Fiberglass insulation should never be left exposed in an occupied area, according to the American Lung Association.

In the US, the National Toxicology Program (“NTP”), in June 2011, removed from its Report on Carcinogens all biosoluble glass wool used in home and building insulation and for non-insulation products. Similarly, California’s Office of Environmental Health Hazard Assessment (“OEHHA”), in November 2011, published a modification to its Proposition 65 listing to include only “Glass wool fibers (inhalable and biopersistent).” The U.S. NTP and California’s OEHHA action means that a cancer warning label for biosoluble fiber glass home and building insulation is no longer required under Federal or California law. All fiberglass wools commonly used for thermal and acoustical insulation were reclassified by the International Agency for Research on Cancer (“IARC”) in October 2001 as Not Classifiable as to carcinogenicity to humans (Group 3).

Fiberglass itself is resistant to mold. If mold is found in or on fiberglass it is more likely that the binder is the source of the mold, since binders are often organic and more hygroscopic than the glass wool. In tests, glass wool was found to be highly resistant to the growth of mold. Only exceptional circumstances resulted in mold growth: very high relative humidity, 96% and above, or saturated glass wool, although saturated wool glass will only have moderate growth.

Uses

Glass wool is a thermal insulation that consists of intertwined and flexible glass fibers, which causes it to “package” air, resulting in a low density that can be varied through compression and binder content (as noted above, these air cells are the actual insulator). Glass wool can be a loose fill material, blown into attics, or, together with an active binder sprayed on the underside of structures, sheets and panels that can be used to insulate flat surfaces such as cavity wall insulation,  ceiling tiles, curtain walls as well as ducting. It is also used to insulate piping and for soundproofing .

The  glass wool board   quantity  package is as following  :

Glass Wool Board Size Package PCS/Bag Package Bag/40HQ
48kg/m3-25mm*1.2m*2.3m     10      102
48kg/m3-50mm*1.2m*2.3m      5      102
48kg/m3-25mm*1.2m*1.2m     18      102
48kg/m3-50mm*1.2m*1.2m      9      102
48kg/m3-25mm*0.6m*1.2m     18      209
48kg/m3-50mm*0.6m*1.2m      9      209
56kg/m3-50mm*1.18m*1.2m      9      106

Glass Wool Technical Parameters   

50mm high density glass wool blankets

Item  Unit       Index Standard
Density Kg/m3 10-80 GB/T 5480.3
Average fiber dia μm 5-8 GB/T 5480.4
Water content   % ≤1 GB/T 16400-2003
Grade of combustibility   Non-combustible Grade A GB 8624-1997
Reshrinking temp 250-400 GB/T 11835-2007
Thermal conductibility W/m.k 0.034-0.06 GB/T 10294
Hydrophobicity % ≥98 GB/T 10299
Moisture rate % ≤5 GB/T 5480.7
Sound absorption  coefficient    1.03 product reverberation method          24kg/m3    2000HZ GBJ 47-83
Slag inclusion   content  % ≤0.3 GB/T 5480.5

Glass Wool Main specification:

Product Length(mm) Width(Diameter)(mm) Thickness(mm) Glass wool Density(kg/m3)
Boards 1200-2400 600-1200 20-100 24-96
Blanket 11000,20000 1200 25-150 12,16,20,24,32,40,48
Batt 1160-1200 410-610 100-200 10-48

Different  Names of   Glass Wool Insulation  

Any required or want to know the Glass Wool price, please contact us.

Get a Free Quote,Send your inquiry directly to us,we will reply you within 3 hours!

Your Name (required)

Your Email (required)

Mobile/WhatsApp (required)

Your Message

captcha